Blue-White FLEX-PRO A4 ProSeries Peristaltic Pump User Manual

Page 24

Advertising
background image

Page 24

4.3.9

Proportional Dosing

Used to configure proportional Parts Per Million dosing to a system. This method
of proportional dosing is based off input pump is receiving from an external flow
meter. Flow meter must have a pulse output. You will need to refer to flow meter
instruction manual to obtain K-factor for flow meter.

Default settings:

12.5% dose solution concentration
1.25 dose solution Specific Gravity
5.0 K-factor (Pulses Per Liter),

see flow meter instruction manual

1.0 Parts Per Million to dose

Press SELECT RUN MODE button until Proportional Dosing is displayed in
the top line of the display.

To configure the pump, navigate to Proportional Dosing menu by using short-
cut method described at beginning of section, or by pressing MENU button, then
selecting Input Setup, Input Modes, and then Proportional.

Press UP or DOWN arrow to scroll through 0 - 9 on selected digit.

Press RIGHT arrow to scroll over to next digit to right. If you pass your desired
digit, you can easily scroll back by continuously pressing RIGHT button.

Press ENTER to save the changes.

Continue this process until all four screens have been configured.

If you used short-cut to enter Proportional Dosing setup, then just press and hold
Select Run Mode button until Run Mode screen is displayed.

If you used Menu button to navigate to Proportional Dosing setup, you must
navigate back out of menu structure. To do this you must select <-Esc at bottom
of every screen menu until you see Run Mode screen displayed.

- Proportional Dosing

Input K-Factor (pulses):

Pulses Per Liter.
0.0001 - 9999.9999

- Proportional Dosing

Dose Specific Gravity:

Specific Gravity of solution.
Press ENTER to set.

.25

1

- Proportional Dosing

Dose Concentration:

Percentage of concentration.

Press ENTER to set.

- Proportional Dosing

PPM to dose:

Parts Per Million to dose.
000.0 - 100.0 PPM

0

12.5%

0

005.0000

0

01.0

Injection
Point

S3 Series | Hybrid Ultrasonic Flowmeter

NEMA 4X

IP 66

Industries, Ltd.

ProSeries

by Blue-White Ind.

TM

Doppler /
Transit Time

Discharge

Line

Paddlewheel

Flow Sensor / Meter

Ultrasonic

Flow Meter

Injection
Point

Example #1, Ultrasonic flow meter

Example #2, Paddlewheel flow meter

Discharge

Line

or

Flex-Pro

Advertising
This manual is related to the following products: