Connection of cable to small detector – Dwyer UXF2 User Manual

Page 36

Advertising
background image

- 2

6

-

3.6.6. Connection of cable to small detector

(1) Loosen the retaining knobs on the detector using a

screwdriver, then remove the cover from the
detector.

(2) Mount the sensors so that the upstream and

downstream sensors can be distinguished from
each other. Remove the cable clamp.

Note) In case of removing the cable clamp, be

careful not to lose the nut.

Fig. 3-19

Fig. 3-20

BULLETIN F-70

Advertising
See also other documents in the category Dwyer Accessories for air: