Dwyer UXF2 - Manual (Page 40)

- 30 -
(4) Attach the other chain end to the other hook of
detector, and secure it loosely in place.
Fig. 3-29
(5) Pull the red ring and attach it to the hook.
Use the same procedure for the other sensor.
Fig. 3-30
(6) Turn over the frame end so that the sensor makes
flush contact with the pipe.
Fig. 3-31
(7) Press the sensor firmly and uniformly against the pipe.
Ensure that the sensor makes a flush contact with the
pipe.
BULLETIN F-70