Dwyer UXF2 - Manual (Page 5)

- iii -
Caution on Maintenance/Inspection
z The unit should be inspected daily to verify proper measurement
results.
z When measuring the insulation resistance between the power/output
terminal and the case, follow “Section 5.2.3 How to measure the
insulation resistance” described in this manual.
z If the fuse is blown, detect and eliminate the cause, and then replace the
fuse with a spare. If there are no spares, replace the fuse with equivalent
specified in this manual (may be procured locally). Use of a
fuse other than specified or its short-circuit may cause an electric shock or
fire. The fuse should be replaced according to “Section 5.3 How to
replace the fuse” described in this manual.
BULLETIN F-70