Milestone XProtect Go 2014 - Manual (Page 102)

Milestone XProtect ® Go 2014 Administrator's Manual
www.milestonesys.com 102 Advanced configuration
Name Description
Set as Home
Use after navigating to a suitable viewpoint using the navigation
buttons. Sets the current viewpoint as home position (that is default
position), so that when client users viewing the camera click their
clients' Home button, their view of the camera changes to that
position.
Button Description
Moves the flattened view up
Moves the flattened view up and to the left
Moves the flattened view up and to the right
Moves the flattened view to the left
Moves the flattened view to its home position (that is default position)
Moves the flattened view to the right
Moves the flattened view down and to the left
Moves the flattened view down
Moves the flattened view down and to the right
Zooms out (one zoom level per click)
Zooms in (one zoom level per click)
PTZ preset positions
PTZ-related properties are only available when you are dealing with a PTZ (pan-tilt-zoom) camera.
You can use PTZ preset positions for making the PTZ camera automatically go to a particular position
when particular events occur, and when setting up PTZ patrolling profiles. Preset positions can also be
used in clients to allow users that have been given rights (see "Configure user and group rights" on
page 166) to move the PTZ camera between preset positions. Names of preset positions must contain
only the characters A-Z, a-z and the digits 0-9. If you import preset positions from cameras (see the