Milestone XProtect Go 2014 - Manual (Page 169)

Milestone XProtect ® Go 2014 Administrator's Manual
www.milestonesys.com 169 Advanced configuration
Recorded audio
Listen to recorded audio from microphones related to the selected
camera(s).
You cannot select a feature, if the selected camera does not support the relevant feature. For
example, PTZ-related rights are only available if the relevant camera is a PTZ camera. Some features
depend on the user’s/group’s General Access (on page 167) properties.
Square-filled check boxes can appear in the lower part of the window if you have selected several
cameras and a feature applies for some but not all of the cameras. Example: For camera A, you have
selected that use of the Events is allowed, for camera B, you have not allowed this. If you select both
camera A and camera B in the list, the Events check box in the lower part of the window is square-
filled. Another example: Camera C is a PTZ camera for which you have allowed the PTZ preset
positions feature whereas camera D is not a PTZ camera. If you select both camera C and camera D
in the list, the PTZ preset positions check box is square-filled.
Alarm management
When you add or edit basic users (see "Add basic users" on page 164), Windows users (see "Add
Windows users" on page 164) or groups (see "Add user groups" on page 165), specify their XProtect
Smart Client alarm management rights:
Name Description
Manage
Allows users of the XProtect Smart Client to:

Manage alarms (for example, change priorities of alarms
and re-delegate alarms to other users)

Acknowledge alarms —in the XProtect Smart Client's alarm
list and maps.

Change state (for example from New to Assigned) of
several alarms simultaneously (otherwise state must be
changed on a per-alarm basis).
View
Allows users of the XProtect Smart Client to:

View alarms

Print alarms reports.
Disable Allows users of the XProtect Smart Client to disable alarms.
Services
About services
The following services are all automatically installed on the system server if you run a Typical
installation. By default, services run transparently in the background on the system server. If you need