Milestone XProtect Go 2014 - Manual (Page 176)

Milestone XProtect ® Go 2014 Administrator's Manual
www.milestonesys.com 176 Advanced configuration
Video Push
If you enable Video push, specify the following settings:
Name Description
Video push Enable Video push on the Mobile server.
Number of channels
Specify the number of enabled Video push channels in your
XProtect system.
Channel column Shows the channel number for the relevant channel. Non-editable.
Port Port number for the relevant Video push channel.
MAC MAC address for the relevant Video push channel.
User Name
Enter the user name associated with the relevant video push
channel.
Camera Name Shows the name of the camera if the camera has been identified.
Once you have completed all necessary steps (see "Add a Video push channel" on page 172), click
Find Cameras to search for the relevant camera.
Export
Specify the following settings for exported recordings:
Name Description
Export Select to enable export in clients.
Include timestamps Select to add timestamps to exported video.
Used codec for AVI files Choose a codec to use to encode your exported AVI video files.
Export to Specify the location to which recordings should be exported.
Delete exported recordings
older than
Enter the number of days to pass before recordings are deleted.
Note that if the value is set to 1 day, exported files are deleted up to
10 minutes from the applied change, not immediately. Users can
restart the Mobile server manually to make the changes take effect
immediately.
Limit size of exports folder to
Enter a number to set a maximum limit for the folder to which the
recordings are exported.
View exports of other users
Select this check box to enable users to be able to view exports
made by other users.
Automatic exports
If you want to set up your system to automatically export video when a certain event occurs, you must
set up rules to instruct the system about when to carry out automatic exports:
Enabled Select this check box to enable automatic exports.