Milestone XProtect Go 2014 - Manual (Page 158)

Milestone XProtect ® Go 2014 Administrator's Manual
www.milestonesys.com 158 Advanced configuration
Action details
Configure the parameters for an action:
Display access request notification:
 Specify which cameras, microphones or speakers the XProtect
Smart Client user connects to via the notification user interface
when a given event occurs. Also specify the sound to alert the
user when the notification pops up. To enable more commands
in the notification, see Add Command.
Go to PTZ preset:
 Specify the camera and select from the pre-configured presets
a pattern for the camera and the time of return to preset when a
given event occurs.
Start recording:
 Specify the cameras that should start recording and the
duration when a given event occurs.
System action:
 Specify an action predefined in the XProtect system.
Add command
Select which commands that should be available as buttons in the
access request notification dialogs in the XProtect Smart Client.
Related access request commands:
 Enables all commands related to access request operations
available on the source unit. For example Open door.
All related commands:
 Enables all commands on the source unit.
Access control command:
 Enables a selected access control command.
System command:
 Enables a command predefined in the XProtect system.
To delete a command, click X on the right side.
Cardholders tab (Access Control)
Use the Cardholders tab to review information about cardholders in the access control system.
Name Description
Search cardholder
Type the characters of a cardholder name and it appears in the list,
if it exists.