PNI TCM 5 - Manual (Page 16)

PNI Sensor Corporation Doc #1007537 r12
TCM3 & TCM5 User Manual- Sept 2011 Page 16
Z Sensor Down Plus 180 Degrees: When selected the unit is to be mounted with the main board in
a vertical position (the Z axis magnetic sensor is vertical) and rotated 180 degrees from the front of
the host system.
Z Sensor Up Plus 270 Degrees: When selected the unit is to be mounted with the main board in a
vertical position (the Z axis magnetic sensor is vertical) and rotated 270 degrees clockwise from the
front of the host system.