Mechanicals, Mechanical drawing, 2 mechanicals – PNI TCM 5 User Manual
Page 7: 1 mechanical drawing
Advertising
PNI Sensor Corporation
Doc #1007537 r12
TCM3 & TCM5 User Manual
– Sept 2012
Page 7
2.2 Mechanicals
2.2.1 Mechanical Drawing
The default orientation for the TCM is for the silk-
screened arrow to point in the “forward” direction. That
puts the edge opposite of the Molex connector as the front edge of the board.
Advertising
This manual is related to the following products: