PNI TCM 5 - Manual (Page 43)

PNI Sensor Corporation Doc #1007537 r12
TCM3 & TCM5 User Manual – Sept 2012 Page 43
kPowerDownDone (frame ID 28)
This frame is the response to kPowerDown frame. This indicates that the unit successfully received
the kPowerDone frame and is in the process of powering down. The frame has no payload.
kFactoryUserCal (frame ID 29)
This frame clears the user calibration coefficients. The frame has no payload. This frame must be
followed by the kSave frame to change in non-volatile memory.
kFactoryUserCalDone (frame ID 30)
This frame is the response to kFactoryUserCal frame. The frame has no payload.
kTakeUserCalSample (frame ID 31)
This frame commands the unit to take a sample during user calibration. The frame has no payload.