Data logger tab, System log tab, 6 data logger tab – PNI TCM 5 User Manual
Page 21: 7 system log tab
PNI Sensor Corporation
Doc #1007537 r12
TCM3 & TCM5 User Manual
– Sept 2012
Page 21
4.1.6 Data Logger Tab
1. Select the data to log in the
“Data” window.
2. Use Shift-Ctrl-Click and Ctrl-Click to select multiple items.
3. Click on the <GO> button to start logging; click the <STOP> button to stop logging.
4. Click on the <Export> button to save the data to a file.
5. Click on the <Clear> button to clear the data from the window.
Note: The data logger use ticks for time reference. A tick is 1/60 second.
4.1.7 System Log Tab
Export:
Select the <Export> button to save the system log to a file.
Graph
The graph provides a 2-axis (X,Y) plot of the measured field strength. The graph can be used to visual-
ly see hard and soft iron effects within the environment measured by the TCM module as well as cor-
rected output after a user calibration has been performed
.