Brother PR-1000 - Manual (Page 12)

11
c
Press .
→ The “Saving” screen is displayed. When the data is
saved, the display returns to the original screen
automatically.
■ Recalling the custom thread table in USB
media
a
Insert the USB media containing the custom
thread table data into the primary (top) USB
port.
b
Press and then press .
c
Press .
→ The “Saving” screen is displayed. When the data is
loaded to the machine, the display returns to the
original screen automatically.
Note
• Do not insert or remove USB media while “Saving”
screen is displayed. You will lose some or all of the
data you are saving.
Note
• You can only recall one custom thread table data at
a time. Do not store two or more “.pcp” data file in
USB media.
Note
• Do not insert or remove USB media while “Saving”
screen is displayed. You will lose some or all of the
data you are saving.
• To delete all the specified colors from the custom
thread palette, press .