Brother PR-1000 User Manual
Page 24
Advertising
23
c
Select the area containing one of the two
positioning stickers, and then press
.
→ The camera detects the two positioning stickers.
d
After the sticker position is detected, press
, and then remove the stickers.
e
Affix the two positioning stickers again
according to the on-screen instructions so
that the next pattern or positioning marks can
fit in the embroidery area.
→ Press
so that the camera detects the first
positioning sticker.
Note
• If the following message appears, rehoop the fabric
as indicated in the screen, and then press
.
Advertising
This manual is related to the following products: