Brother PR-1000 - Manual (Page 5)

4
e
When the fabric appears as a background for
the pattern, the pattern can be edited if it is
necessary.
f
Use to align the pattern with the
desired embroidery position.
• The pattern can be moved to the desired position by
using your finger or the touch pen to drag the
pattern displayed on the screen.
g
Press to display the embroidery
settings screen.
h
Press to start embroidering.
→ When embroidery is finished, the fabric displayed in
the background disappears.
Whether the fabric disappears or remains displayed can
be specified from page 7/7 of the settings screen.
a Set to “ON” to leave the fabric displayed in the
background.
b When set to “OFF”, the background will disappear.
c Press to remove the background image
completely.
Memo
• If necessary, press to display a preview in
order to check the pattern position.
Memo
• The pattern can also be aligned from the embroidery
settings screen.
Note
• If the embroidery is not sewn, the fabric background
will remain on the screen.
In the Settings screen 7/7, press to erase
the background image.
b
a
c