Brother PR-1000 - Manual (Page 23)

22
a
Refer to steps
a
through
m
of “Practice
(Connecting Three Patterns)” using the
embroidery frame with a size of 10 cm x 10
cm (4 inches x 4 inches) to embroider the first
pattern and to connect the second pattern.
b
Following message appears in step
n
if the
next pattern or affixed positioning stickers are
close to being out of the embroidering area.
Follow the instructions and then press
.
a Embroidering area
a Pattern to be embroidered next
b Embroidery sheet
Note
• When referring to steps a through m , make sure
you change the reference edge and reference point
to reflect this exercise.
a