Brother PR-1000 - Manual (Page 29)

28
a First pattern
b Second pattern
c Vertical distance : - 15.0 mm
d Horizontal distance : + 40.0 mm
■ Connecting Patterns to be Joined Along an
Edge
Greater design variations can be created by sliding the
patterns being connected.
The following procedure describes how to use this
function to connect patterns so they are joined along an
edge. Before connecting the patterns, the basting
function will be used to measure the distance that the
pattern will be slid.
A: First pattern
B: Second pattern
Measuring the Distance That the Pattern
Will Be Slid
a
Set “Basting Distance” in the settings screen
to “0.0”.
b
a
Note
• Steps a through d are for measurement
placement only. Be sure to sew trial embroidery
using same fabric and threads as project in order to
check the embroidering results.