Brother PR-1000 - Manual (Page 20)

19
p
After the positioning stickers have been
detected, press , and then remove the
stickers.
• Press to remove the positioning stickers
when it’s hard to reach the stickers behind the
needles.
q
Press , then press and then
press the start/stop button to embroider the
second pattern.
→ After embroidering of the second pattern is finished,
the following message appears. Press .
Note
• If either of the following messages appear, rehoop
the fabric so that the next pattern and both the
positioning stickers are within the embroidery
sewing area as indicated in the screen.
Press , and then press to detect
the positioning stickers.