Brother PR-1000 - Manual (Page 11)

10
f
Press to select the displayed color
scheme.
* Press to return to the previous screen.
* You can continue selecting color schemes from the
selected page prior to pressing .
* Press or to display the other color schemes.
→ The embroidery edit screen will appear.
Saving and Recalling the Custom
Thread Table using USB media
You can save a custom thread table data file to USB
media, and then you can recall the saved data from
USB media again. Refer to “Creating a custom thread
table” in the Operation Manual of the machine, for the
detailed instructions about a custom thread table.
■ Saving the custom thread table in USB media
a
Insert the USB media into the primary (top)
USB port on the right side of the machine.
a Primary (top) USB port for media
b USB media
b
Press and then press .
Note
• The following settings in the settings screen cannot
be changed in this function;
- Thread color brand selection
- Reserved needle setting
- PES Thread Code setting
Note
• Custom thread table data can only be saved to USB
media. You cannot save the data in the machine’s
memory or in the computer.
• Custom thread table data is saved as “.pcp” data
file.
Note
• Two USB media cannot be used with this machine
at the same time. If two USB media are inserted,
only the USB media inserted first is detected.