Brother PE-DESIGN Ver.432 User Manual
Page 173
Advertising
163
5
If the data cable between the card module and the computer or the power adaptor is disconnected
while reading is in progress, reading will stop and this message will display:
Check all the connections and correct as necessary, then try again from the start.
If the connections are correct, then a cable may be defective. Consult your dealer.
6
When every COM port is already in use for other peripherals, the following message appears.
Disconnect a peripheral connected to your computer and try again.
◆
Click
OK
to remove the message.
◆
Click
OK
to remove the message.
Advertising