Step 6 moving to sew setting, Step 7 setting sewing attributes, Setting the outlines – Brother PE-DESIGN Ver.432 User Manual
Page 26: Moving to sew setting, Setting sewing attributes, Step 6, Step 7, Setting the outlines 1
16
Step 6
Moving to Sew Setting
1
Click
Stage
on the menu bar, then click
To
Sew Setting
on the submenu.
You can also click the button of the Toolbar shown below:
The Sew Setting window appears.
In this stage, you can set and check the sewing attributes of each part of the pattern. You can also
set a pair of patterns for hole sewing in order to avoid sewing twice at the same place.
The other tools available are for zooming.
2
To zoom in and out, use the
and
buttons on the Tool Box in the same way as you did at
the Figure Handle stage.
3
To maximize the Design Page so that it fits the window, click
on the Tool Box.
Step 7
Setting Sewing Attributes
We are now going to apply sewing attributes to the different parts on the picture.
■
Setting the outlines
1
Click
on the Tool Box.
The shape of the cursor changes to
and is displayed together with a small figure of the Tool
Box button.
The Sewing Attributes bar now looks like this: