Brother PE-DESIGN Ver.432 - Manual (Page 178)

168
Contents
Bef
ore Using
Getting Star
ted
Design Center
La
y
out & Editing
File Utility
Programma
bl
e
Stich Creator
Quic
k Ref
erence
Alphabetic Inde
x
File Menu
The File menu is used only to exit this application.
■ Exit
Purpose: Exits the application.
Shortcut key: +
Operation:
1
Click File , then Exit .
The application closes immediately.
Option Menu
The Option menu is used only to set up the serial port.
■ Serial Port Setting
Purpose: Allows you to set up the computer serial port connection to the card writer module.
Shortcut key: No shortcut key for this function
Operation:
1 Click Option , then Serial Port Setting .
A Serial Port Setting dialog similar to this one displays.
The number of COM ports selectable depends on your computer settings.
◆ When the default setting AUTO is
selected, the COM port to which the
card writer module is connected is
automatically recognized.
◆ When COM 1 ~ 4 is selected, the
data is sent to the selected COM
port. Check the port to which your
card writer module is connected,
then select the appropriate
COM
port.
◆ Click OK to confirm.
◆ Click Cancel to exit.
Using the Menu Bar
Alt F4