Brother PE-DESIGN Ver.432 - Manual (Page 87)

77
Contents
Bef
ore Using
Getting Star
ted
Design Center
La
y
out & Editing
File Utility
Programma
bl
e
Stich Creator
Quic
k Ref
erence
Alphabetic Inde
x
Sew Menu
The Sew menu allows you to control the way the pattern will be sewn.
■ Sewing Attributes
Purpose: Sets the sewing attributes for outlines and regions.
Shortcut key: +
Toolbar:
Operation:
1 Click Sew , then Sewing Attribute .
In Line Sewing Mode, the Sewing Attribute Setting dialog displays the Line sewing tab. Here you
can change the settings of the stitch selected in the Line sew type selector of the Sewing Attributes
bar. The other stitch settings display in gray.
Sewing Attributes Sets the sewing attributes for outlines and regions. page 77
Sewing Order
Allows you to check and modify the sewing order of the dif-
ferent colors of a pattern as well as the sewing order of
each color individually.
page 80
◆ Enter the desired values for each set-
ting either by clicking on the arrows or
by typing the value directly in the edit
box window.
• A preview image of the stitch reflects
your setting changes each time you
click on an arrow, except for the
Run
time (s) setting.
◆ To restore the default value of an indi-
vidual setting, click its
Default button.
◆ Click the outline(s) you want to apply
the selected settings to.
◆ Click Close to exit.
Line sewing attribute
Zigzag stitch
ZigZag width
Sets the width of the zigzag stitch (when Zigzag Stitch is selected for the outline).
Range: 1 ~ 10 mm (0.04 ~ 0.39 inch)
Default: 2 mm (0.08 inch)
Density
Sets the number of lines per mm (inch) (when Zigzag Stitch is selected for the out-
line).
Range: 1 ~ 7 lines per mm (25 ~ 178 lines per inch)
Default: 4.5 lines per mm (114 lines per inch)
Ctrl W