Brother PE-DESIGN Ver.432 - Manual (Page 73)

63
Contents
Bef
ore Using
Getting Star
ted
Design Center
La
y
out & Editing
File Utility
Programma
bl
e
Stich Creator
Quic
k Ref
erence
Alphabetic Inde
x
The Sewing Attribute Setting dialog for the selected stitch displays.
Hole Sewing Mode
The hole sewing mode is used to avoid sewing overlapping areas twice. It can be set only when one of
the overlapping areas is completely enclosed in another area.
1 Click on the Tool Box.
The shape of the cursor changes to and is displayed together with a small figure of the Tool
Box button.
2 Click on the enclosing part of a pattern comprised of a region completely enclosed into another
one.
3 This dialog will display.
◆ If necessary, change the settings.
See “Sewing Attributes” on page 77.
• To restore the default value of a set-
ting after changing it, click the
Default
button at the left of that setting.
◆ To apply the new settings to single
lines, click the lines you want to apply
the settings to with the left button.
◆ Click Close to remove the dialog from
the screen.
◆ Click on the central region to toggle hole sew-
ing on/off.
◆ Click OK to set hole sewing.
◆ Click Cancel to exit without setting hole sewing.