Canon DP-V3010 - Manual (Page 11)

11 Nomenclature
Nomenclature
Main Unit
■ Front
1 2
3
1 F1 to F4 button Executes the defined function.
The following functions have been assigned at the factory. These functions can be
changed if necessary.
F1: Channel UP
F2: Channel DOWN
F3: Time Code (On/Off)
F4: Aspect Marker (On/Off)
25
2 button (Power button) Turns power On/Off. 22
3 Power indicator Displays the status of the main unit. The brightness of the power indicator can also be
set from "1 (dark) to 5 (brightest)". Even when the power indicator is "Off", it will flash
during firmware upgrade, network settings reset, or when an error is detected.
Off: main power supply off
Green lit: main power supply/Power on
Green flash: during calibration, firmware upgrade, or network settings reset in
progress
Amber lit: standby (Main power supply on and power supply off)
Amber flash: when error is detected
50
73
■ Rear
4 5 6 5
4 Main power supply
switch
Turns main power supply On/Off. 22
5 Handle Use for carrying the main unit. –
6 AC power input terminal Connects to AC power supply cord. 22
COP
Y