Canon DP-V3010 - Manual (Page 36)

36 OSD Menu
Adjustment
This menu is used to adjust the image quality and perform calibration without a PC.
Item Setting Options (underline indicates factory default)
Picture Mode Select a preset mode. See 38 for each setting.
SMPTE-C, EBU, ITU-R BT.709, Adobe RGB, DCI: Mode set to the brightness, color temperature,
gamma, and color gamut of the three primary colors chromaticity points of each standard.
User 1-7: Custom modes. Set each item of "Adjustment".
Canon Log: Canon Log is ideal when viewing image captured with CINEMA EOS SYSTEM camera/
video camera. Performs linear conversion and displays Canon Log video without having to import
Viewing LUT.
Contrast Adjusts the white level of the image. (Increments of 1)
0000 to 2000
Brightness Adjusts the black level of the image. (Increments of 1)
-500 to 500
Chroma Adjusts the color saturation of the image (color depth). (Increments of 1)
0000 to 2000
Sharpness Adjusts the sharpness of the image. (Increments of 1)
000 to 100
Backlight
Control Switches the backlight control method.
Local Dimming (High, Middle, Low): Local dimming is a technology to control the amount of light
emitted by the backlight for each area. The backlight of bright area is increased and the dark area
is decreased according to the displayed content. Contrast increases as local dimming increases
("High").
Global Dimming: Global dimming is the ability to control the amount of light emitted by the
backlight on the entire screen. If the image is dark, the whole display is darken.
Off: No backlight dimming.
Note
• When "Global Dimming" is selected, the contrast may change temporarily in order to maintain
gradation depending on the image. If this is annoying, turn it "Off" and see.
Color Temperature Sets the color temperature.
D93, D65, D61, D56, D50, DCI, Custom: Select from preset color temperature.
x, y: You can enter CIE x, y in increments of 0.001. "Custom" mode is entered automatically as you
type.
x: 0.260 to 0.360
y: 0.260 to 0.360
Note
• The displayed color coordinates (x, y) are just a guide and not guaranteed absolute values.
Gamma Sets the Gamma.
2.2, 2.35, 2.4, 2.6, Canon Log (WideDR 1.1): Select a preset gamma. "Canon Log (WideDR 1.1)"
supports "LUT (Look-up Table) for Canon Log Gamma and Canon Log ** to WideDR ** LUT Version
1.1".
User LUT: When "User 1-7" or "Canon Log" is selected for "Picture Mode", load an external LUT
and configure.
Color Gamut Color gamut can be selected when "User 1-7" or "Canon Log" is selected for "Picture Mode".
SMPTE-C, EBU, ITU-R BT.709, Adobe RGB, DCI: Color gamut compliant to each standard.
Native: Color gamut that can be displayed by this video display.
User LUT: Sets by loading an external LUT.
COP
Y