Canon DP-V3010 - Manual (Page 16)

16 Installation/Connection
Connecting the Main Unit to Input Devices
This main unit has four inputs which correspond to a display area. The display area icons located in the input terminal
area shows where the input video is displayed on the screen. Please ensure these are connected correctly as indicated
by the icons.
In addition, SDI has two I/O systems. Please ensure these are connected correctly according to the input number.
CAUTION
• Check that the main power of the main unit and input devices is switched off before connecting.
• For safety, do not connect connector that may have excessive voltage to the terminal of this main unit when connecting
peripheral devices.
C
B
D
A
A B
C D
C
B
D
A
Display area icon Display area icon
3G/HD-SDI DisplayPort
Actual screen display location
Input
number Input
number
■ 4K or QFHD signals input through SDI
Displays using 4 inputs.
3G/HD-SDI Dual Link HD-SDI
3G/HD-SDI supports two input systems. Input Link A signal to input 1, Link B signal to input 2.
Input 3G/HD-SDI 1 to input 1,
Input 3G/HD-SDI 2 to input 2 ("Input Configuration"
39).
Area A
(3G/HD-SDI 1)
Area B
(3G/HD-SDI 1)
Area C
(3G/HD-SDI 1) Area D
(3G/HD-SDI 1)
Area A
(3G/HD-SDI 2) Area B
(3G/HD-SDI 2)
Area C
(3G/HD-SDI 2) Area D
(3G/HD-SDI 2)
Area A
Area C
Area B
Area D
COP
Y