Canon DP-V3010 - Manual (Page 53)

53 Main specifications/Performance
Main specifications/Performance
Main Unit
Panel
Panel Type IPS LCD panel
Screen Size 30 inch (76.1 cm)
Aspect Ratio 16:10
Resolution 4096x2560 (10.5 megapixels)
Active Display Area Approximately 645.1 x 403.2 mm
Pixel Pitch 157.5 μm
Panel Driver 1024 gradations 10-bit for each RGB color
Image quality
Brightness (Standard) 48 cd/m 2 (DCI), 100 cd/m 2
View Angle (Up, Down, Left, Right) 89° (contrast ratio 10 : 1 or higher)
Surface Treatment Low-Reflection Glare
General
Backlight Type RGB LED, direct down type
Power Rated Voltage: 100 – 240 V AC
Rated Frequency: 50/60 Hz
Power consumption At maximum load (including change in brightness through aging): Approximately 370 W
At factory shipment: Approximately 130 W
Environmental
Conditions Operating Temperature and humidity: 5 – 35 °C (41 – 95 °F), 20 – 80 %RH (no condensation)
recommended: 15 – 30 °C (59 – 86 °F)
Pressure: 700 – 1060 hPa
Storage/
Transporting Temperature and humidity: -20 – 40 ˚C (-4 – 104 °F), 10 – 85 %RH (no condensation)
41 – 60 ˚C (105 – 140 °F), 10 – 40 %RH (no condensation)
Pressure: 700 – 1060 hPa
Dimensions (width x height x depth) Approximately 708 x 474 x 189 mm (27.9 x 18.7 x 7.4 in.)
Weight Approximately 24 kg (52.8 lb)
Mounting Hole Pitch VESA standard 200 x 200 mm (7.9 x 7.9 in.)
Interface
Input 3G/HD-SDI 8 (2 systems)
BNC (75
Ω) receptacle terminal
3G-SDI: SMPTE 2048-2/274M/296/372/425-1/428-19/428-9 compliant
HD-SDI: SMPTE 2048-2/274M/292-1/296/428-19/428-9 compliant
HD-SDI Dual: SMPTE 2048-2/274M/372/428-19/428-9 compliant
DisplayPort 4 (1 system)
DisplayPort terminal
DisplayPort Standard Specification Ver.1.1a compliant
Output 3G/HD-SDI 8 (2 pass-thru systems)
COP
Y