Canon DP-V3010 - Manual (Page 47)

47 OSD Menu
Function Settings
This menu is used to display, define and apply various functions.
Item Setting Options (underline indicates factory default)
Various Function Displays the function list to execute functions.
Monochrome, Blue Only, Red Off, Green Off, Blue Off, H Delay, V Delay, Backlight Scan,
Show OSD*
1 , CDL Override* 2
* 1 Show OSD
On: Displays all OSD.
Off: Hides OSD when adjusting SHARPNESS / CHROMA / BRIGHTNESS / CONTRAST or CDL
from the display controller.
* 2 CDL Override
When "CDL Override" is set to "On", you can temporarily disable the CDL adjustment result and
return to the image quality before adjustment. When returned to the image quality before adjustment,
you cannot adjust the POWER, SATURATION, OFFSET, or SLOPE.
Note
• "H Delay"/"V Delay" can be set only for SDI signal.
• When "H Delay" is "ON", the image display position can be adjusted using the display
controller’s for video in 1280x720 / 24.00P, 25.00P, 30.00P format. Adjust with the menu
screen closed.
• When checking the blanking area using "H Delay"/"V Delay", an audio signal check can be
performed, however some data is not displayed.
Time Code Display the time code superimposed on the SDI signal.
Note
• When "Test Pattern" is "On", "Time Code" is not performed.
Enable Switches the time code display On, Off.
On, Off
Type Selects the type.
VITC, LTC
Size Selects the size.
Large, Small
COP
Y