Installation/connection, How to carry the main unit, Preventing from tipping – Canon DP-V3010 User Manual

Page 15: How to carry the main unit preventing from tipping, Cop y

Advertising
background image

15

Installation/Connection

Installation/Connection

How to Carry the Main Unit

CAUTION

• When unpacking or carrying this main unit, please note that at least two people are required.
• Please carry the main unit as illustrated in the figure below. Please take particular care as the main unit may tilt and cause

injury or get damaged, when carried.

Handle

Preventing from Tipping

The supplied tip prevention fitting TP-01 can be used to significantly reduce the risk of the main unit tipping or falling.
Make sure to complete the power and input device connections beforehand.

1. Remove two top screws at the rear of the main unit using the supplied hex key HK-01.

Do not lose the removed screw. Do not use these screws for other purposes.

2. Insert the tip prevention fitting TP-01 into the two top screw holes and secure.

Screws

3. Pass a safety strap through the ring of the tip prevention fitting TP-01 and secure to the wall or stand.

CAUTION

• When securing the main unit to a stand, please ensure the stand is strong enough to carry the weight of the main unit.
• Do not move the main unit after it is secured.

COP

Y

Advertising