Canon DP-V3010 - Manual (Page 31)

31 Using the OSD Menu
Set Date/Time ( 50)
This section describes how to set the Date/Time. The Date/Time of this video display will be reset if the main power is
turned off for about 20 days.
1. Press the MENU button to open the OSD menu.
2. Select "System Settings"→"Date/Time".
A screen to input the Date/Time appears.
3. Press the buttons to move the selection frame.
Use the buttons to change the numeric value. Repeat until you complete setting the year, month, date, hour,
and minute.
4. Press the SET button when you are finished.
The selection frame moves to "OK".
5. Check the content and press the SET button to confirm settings.
Reference
• When selecting "Cancel" or pressing MENU button before selecting "OK", the settings will be discarded and the previous
screen will be displayed.
Inputting Characters
This section describes how to input the characters. Use this when specifying "Channel Name" and "Display Name".
1. Press the MENU button to open the OSD menu.
2. The character input screen appears automatically when
character input is required.
Use the buttons to move the selection frame as
required.
3. Press the buttons to select the required character.
The following characters can be selected: Press
buttons to display them one by one. You can input up to 16
characters.
Alphanumeric characters: A to Z, a to z, 0 to 9
Symbols: , . : ; ‘ ` - + / = % & ! ? # _ | $ ^ ~ @ { } [ ] < > ( ) space
4. Repeat steps 2 and 3 until the desired text has been inputted.
5. Press the SET button when input is complete.
The selection frame moves to "OK".
6. Check the content and press the SET button to confirm settings.
Reference
• When selecting "Cancel" or pressing MENU button before selecting "OK", the settings will be discarded and the previous
screen will be displayed.
• Factory default is all blank.
• Previously inputted text is displayed for the second and subsequent times.
• To erase the character in the selection frame, press the RESET button above SHARPNESS or CHROMA.
COP
Y