Viewing and changing wi-fi, Settings 140, Cop y – Canon XA20 User Manual

Page 140: Viewing and changing wi-fi settings

Advertising
background image

Viewing and Changing Wi-Fi Settings

140

Viewing and Changing Wi-Fi Settings

When the camcorder is connected to an access point or to a Wi-Fi-enabled device, you can view the
Wi-Fi connection settings and even change them, if necessary.
To enter text for the various settings, use the virtual keyboard (A 136).

1 Open the [Wi-Fi] screen.

[MENU]

>

s

>

[Wi-Fi]

To view the smartphone’s connection settings

2 Touch [Smartphone Connection].

• The camcorder’s SSID will appear.

• Touch [Í] and [Î] to view more information.

• You can change the camcorder's password, port and operating frequency (2.4 GHz or 5 GHz)*.

*

The operating frequency cannot be changed for camcorders whose identification plate contains

"ID0030" and "2.4GHz only" (A 123).

To view the access point’s connection settings

2 Touch [Access Point Connection].

• The four access points’ SSID settings in the camcorder’s memory will appear.

• To add an access point, touch [Not configured] and then perform the procedure in Wi-Fi

Connection Using an Access Point (A 137). After doing so, the screen from this step will appear
again.

3 Touch [w] next to the SSID of the access point whose settings you want to view.

• The access point’s settings will appear.

• Touch [Í] and [Î] to view more information.
• To delete the settings, touch [Edit]

>

[Delete]

>

[Yes].

4 If necessary, touch [Edit]

>

[Manual Setup] to change the settings and then perform the

procedure in Manual Setup (A 138).

To view the FTP server's connection settings

2 Touch [FTP Server Settings].

• The FTP server's settings will appear.

• Touch [Í] and [Î] to view more information.

3 If necessary, touch [Edit] to change the settings.

Operating modes:

COP

Y

Advertising
This manual is related to the following products: