Onscreen displays and data code 92, 92)/ba, Cop y – Canon XA20 User Manual

Page 92

Advertising
background image

Onscreen Displays and Data Code

92

Onscreen Displays and Data Code

You can turn most onscreen displays on or off.

Repeatedly press D to turn the onscreen displays on/off in the following sequence:

mode:

• All displays on
• Onscreen markers

1

• Displays off

mode

2

:

• Only data code on

• All displays on

1

The onscreen markers will be displayed only when p

>

[Onscreen Markers] is set to an option other than [j Off].

2

Pressing D has the same effect as touching the screen. During
single photo view and while playing back a scene, the playback
controls are displayed only momentarily.

Operating modes:

About the Data Code

With every scene or photo recorded, the camcorder keeps a data code (date/time of recording,
information about the camera setup, etc.).
You can select the information to be displayed with the s /

>

[Data Code] setting.

COP

Y

Advertising
This manual is related to the following products: