Activating the microphone’s attenuator, Input terminals) 87, Cop y – Canon XA20 User Manual

Page 87

Advertising
background image

Recording Audio

87

1 Open the desired INPUT terminal’s sensitivity submenu.

[FUNC.] > [MENU] > p > [INPUT 1 Mic Trimming] or [INPUT 2 Mic Trimming]

2 Touch the desired level and then touch [X].

• The available sensitivity levels are +12 dB, +6 dB, 0 dB, -6 dB and -12 dB.

Activating the Microphone’s Attenuator (INPUT terminals)

You can activate the microphone attenuator (20 dB) for microphones connected to the INPUT 1 and
INPUT 2 terminals to prevent audio from being distorted if the audio level is too high.

POINTS TO CHECK

• Set the sensitivity switch of the desired INPUT terminal to MIC or MIC+48V.

1 Open the desired INPUT terminal’s microphone attenuator submenu.

[FUNC.] > [MENU] > p > [INPUT 1 Mic Att.] or [INPUT 2 Mic Att.]

2 Touch [i On] and then touch [X].

COP

Y

Advertising
This manual is related to the following products: