Canon REALiS SX80 Mark II D - Manual (Page 102)

Setting the Image Quality
102
Reducing the Lamp Brightness
[Lamp mode]
Reducing the lamp brightness reduces
power consumption and cooling fan noise.
You can enable or disable this mode also
with the LAMP button on the remote con-
trol.
SX80 MarkII
Press the OK button to accept your setting
and then press the MENU button.
• [Normal] is the factory default.
• The setting you have made is stored as
a setting value of input signals being
projected in an image mode.
Resetting the Image Settings
[Reset]
You can reset the current image settings to
the default settings.
Press the OK button to accept your setting
and then press the MENU button.
• Only the setting of the combined input
signals being projected and an image
mode is reset.
HDMI COMPONENT
DIGITAL PC VIDEO/S-VIDEO
ANALOG PC USB
Normal Projects an image at the normal bright-
ness level.
Quiet Reduces the lamp brightness and cool-
ing fan noise.
Lamp mode
Image adjustment
HDMI COMPONENT
DIGITAL PC VIDEO/S-VIDEO
ANALOG PC USB
OK Resets the image settings.
Cancel Cancels resetting of the image set-
tings.
Reset
Image adjustment