Projector control – Canon REALiS SX80 Mark II D User Manual
Page 136
Setting Network (SX80 II)
136
■Projector Control
1
Click the [Projector control] button on the network setting screen.
The projector control screen appears.
Controlled items:
[Power]:
Turn ON/OFF the projector (
)
[Input]:
Select an input signal (
[Aspect]:
Select an aspect ratio (
)
[Image mode]: Select an image mode (
)
[Blank]:
Blank out the image temporarily (
)
[Mute]:
Mute the sound temporarily (
)
[Auto setup]:
Perform the auto setup function (
)
[Auto PC]:
Perform the auto PC function (
• For [Input], [Aspect], and [Image mode], select an item and click the [Apply] button.
• Click the [Refresh] button to display the latest information.
• Click the [Back] button to return to the network setting screen.
• Do not use the [Back], [Forward], or [Refresh] button on your web browser when you con-
trol the projector. Using the web browser buttons may cause the projector to be malfunc-
tioned. Be sure to use the buttons on the network setup window.
• Before terminating control of the projector, press the [Refresh] button to check whether
the new setting is properly updated or not.