Canon REALiS SX80 Mark II D - Manual (Page 89)

89
Setting Display Status
Setting Up Functions fr
om
Menu
s
No Signal Screen (SX80 II)
[User screen settings] - [No signal screen]
You can display either of a black or blue
screen when there is no input signal.
Press the OK button to accept your setting
and then press the MENU button.
• [Blue] is the factory default.
Screen When Blank (SX80 II)
[User screen settings] - [Screen when blank]
You can display a black or blue screen
when the projected image is blanked off
temporarily by pressing the BLANK button
on the remote control.
Press the OK button to accept your setting
and then press the MENU button.
• [Black] is the factory default.
HDMI COMPONENT
DIGITAL PC VIDEO/S-VIDEO
ANALOG PC USB
Black The screen is all black.
Blue The screen is blue background.
User screen settings
Display settings
No signal screen
HDMI COMPONENT
DIGITAL PC VIDEO/S-VIDEO
ANALOG PC USB
Black The screen is all black.
Blue The screen is blue background.
User screen settings
Display settings
Screen when blank