Canon REALiS SX80 Mark II D - Manual (Page 82)

Setting Display Status
82
Adjusting Input Signal (ANALOG PC) –
Tracking
[Input signal settings] - [Tracking]
You can fine-tune the timing for generating
an image from the image signal.
Adjusts the tracking when the image dis-
torts or flickers.
Use [<] / [>] to select a value.
When you have completed the adjust-
ment, press the MENU button.
• Perform this adjustment if the [AUTO
PC] function ( P57 ) cannot adjust the
project image correctly.
• You can make adjustment either for
[ANALOG PC-1] or [ANALOG PC-2].
Adjust Input Signal (ANALOG PC) – Hori-
zontal position
[Input signal settings] - [Horizontal position]
You can adjust the horizontal position of
the screen when the projected image is
shifted in the horizontal direction.
Use [<] / [>] to select a value. As the value
increases, the screen moves to the left.
When you have completed the adjust-
ment, press the MENU button.
• Perform this adjustment if the [AUTO
PC] function ( P57 ) cannot adjust the
project image correctly.
• You can make adjustment either for
[ANALOG PC-1] or [ANALOG PC-2].
HDMI COMPONENT
DIGITAL PC VIDEO/S-VIDEO
ANALOG PC USB
Input signal settings
Display settings
Tracking
HDMI COMPONENT
DIGITAL PC VIDEO/S-VIDEO
ANALOG PC USB
Input signal settings
Display settings
Horizontal position