Error notification message – Canon REALiS SX80 Mark II D User Manual

Page 135

Advertising
background image

135

Setting Network (SX80 II)

Conn

ec

tin

g the Projector to

N

etwork (SX80 II)

Error Notification Message

It sends the following message when an error occurs in the projector.

Error list

* Contact your Canon dealer.

Errors related to
temperature

Error name

Temperature abnormality

Text

The temperature inside the projector is too high for some
reason or the outside air temperature is higher than the
specified one. If the problem is inside the projector,
check whether the projector is installed and operated
normally, turn off the projector to cool its inside, and retry
projection. If the same warning occurs again, the projec-
tor may be defective. Contact your dealer.

Errors related to
the lamp

Error name

Faulty lamp

Text

The lamp has burnt out. Replace the lamp with a new
one. If the same warning occurs again, the lamp drive
circuit may be defective. Contact your dealer.

Errors related to
the lamp cover

Error name

Faulty lamp cover

Text

The lamp cover is open. Check whether the lamp cover
is installed properly. If it is installed properly, the lamp
cover detection switch may be defective. Contact your
dealer.

Errors related to
the cooling fan

Error name

Faulty cooling fan

Text

The cooling fan or another component may be defective.
Contact your dealer.

Errors related to
the power supply

Error name

Faulty power supply

Text

The voltage of part of the power supply is abnormally
high or any other problem has occurred in the power
supply. Contact your dealer.

Other types of
errors

Error name

Unknown Error

Text

Codes in hexadecimal numbers*

Advertising
This manual is related to the following products: