HP Matrix Operating Environment Software User Manual
Page 26
4.
Select Add, and complete the following for each VLAN ID that needs to have a vNIC
created.
NOTE:
You need to know which VLAN IDs will be used on the selected NIC.
•
Enter a descriptive name for the VLAN in the VLAN Name field (this is the name
that will be used when configuring the Hyper-V virtual switch).
•
Enter the VLAN ID in the VLAN Id field.
3.
To create a Hyper-V virtual switch for each VLAN ID, do the following for each Hyper-V
VM host.
NOTE:
For any given virtual switch, all VMs must use either a tagged network or a
non-tagged network across all hosts.
CAUTION:
Mixing tagged and non-tagged Hyper-V VMs on the same virtual network will
result in network failures. HP recommends that you maintain a homogenous network
environment among cooperating Hyper-V hosts. To achieve this, for all uses of a named
virtual switch, use a tagged network on all hosts or use an untagged network on all hosts.
4.
Annotate the Insight Orchestration VLAN ID for each discovered Insight Orchestration
subnet corresponding to a Hyper-V virtual switch.
26
Configuration