HP Matrix Operating Environment Software - Manual (Page 89)

Storage Pool Entries defined in ID-VSE UI may not be shown under Storage page in HP IO console. Issue
• The HP IO console's Storage page has not been refreshed since changes are made in ID-VSE's
Manage Storage Pool page.
• The storage pool entry is filtered out because it is invalid for HP IO to use.
Possible cause
• Refresh the HP IO Storage page.
• Verify the storage pool entry in the ID-VSE's Manage Storage Pool page to make it valid for
HP IO to use:
— Ensure the Storage Entry Operating System is correctly specified.
— Ensure the WWN is correctly specified.
— Ensure the LUN is correctly specified.
— Refresh the HP IO Storage page.
Action
Service deletion
Physical
Troubleshooting items addressed in this section:
• Insight Orchestration Delete Service request leaves “clean-me” logical servers
• Insight Orchestration did not correctly erase the disk during deprovisioning.
• An infrastructure service has been deleted, but I did not delete it.
• A delete request has failed. The environment must be manually cleaned.
Insight Orchestration Delete Service request leaves “clean-me” logical servers Issue
If using Insight Control server deployment, the job “Erase ProLiant ML/DL/BL Array
Configuration {LinuxPE}
” has not been modified for Insight Orchestration.
If using Ignite-UX, the client has not been set up with permission to run the erase disk job in HP
Systems Insight Manager.
Possible cause
If using Insight Control server deployment, follow Step 9 in the Creating server deployment job
folders procedure. The job must have only two steps:
Details Task
Wipe Disk Run Script
Shutdown (if
available) Power Control
NOTE: If you use the mxnode command, you must also enter the root/<root password>
for the provisioned server into the global credentials for HP SIM
(Options
→Security→Credential→Global Credentials).
mxagentconfig –a –n <target IP or DNS name> –u <user> –p <password>
Where:
<user> is root
<target IP or DNS name> is the IP address of the newly created Systems Insight Manager node
<password> is the root password of the newly created Systems Insight Manager node
Action
Working with services 89