HP Matrix Operating Environment Software User Manual
Page 80
•
Unable to allocate servers and networks in the same Virtual Connect
Domain Group. Either more available servers are required, or could not
match existing servers against memory size, disk space and processor
count requirements.
Failure message
Reservation failed because:
•
There were insufficient suitable servers in the server pools referenced in the Create Request.
•
One or more servers considered available for use were actually in the maintenance pool.
•
At least one of the server blades in a referenced user server pool already has a profile assigned.
Possible cause
•
Verify that the Insight Orchestration server pools referenced in the Create Request contain
sufficient suitable servers taking into account all the server, storage and networking
requirements of the template.
•
Check whether or not any servers were moved to the maintenance pool due to a previous
provisioning failure. Check for “clean-me” logical servers. If there are any, perform a manual
cleanup process. See
•
If these steps do not identify the issues, then verify that each server (blade only), that Insight
Orchestration considers free, does not have a Virtual Connect profile assigned to it. To do this,
identify each available (not “in use”) server blade in Insight Orchestration and do the following:
1. From Systems Insight Manager, select Tools
→VSE Management→Virtual Connect
Enterprise Manager (VCEM)
→VCEM Homepage.
2. Select the Profiles tab, and unassign any profile associated with the server blade.
3. From the Insight Dynamics Management screen, select Tools
→Logical Servers→Refresh
to refresh HP Insight Dynamics and activate your changes.
4. In the Insight Orchestration console Servers tab, click the circling green arrows icon (to
the left of: Click to refresh server resources) for changes to be detected.
Action
80
Troubleshooting