HP Netserver L Server series - Manual (Page 11)

Chapter 1 Controls, Ports and Indicators
5
Power Mouse Parallel
LAN
A/MGMT LAN B
PCI Slot (1)
Keyboard Serial
A/MGMT
Video External
SCSI Connector
Figure 1-3. Rear Panel and Ports
Table 1-3. Rear Panel LED Indicators
Indicator Definition
Power Supply
LED
Each power supply module has a status LED:
• Steady Green indicates the power supply module is powered
up and operating normally.
• Flashing Green indicates that AC current is present and the
power supply module is in standby mode (HP Netserver is
powered off).
• Steady Amber may indicate a power module failure, a system
over-current condition, a blown fuse in the power supply
module or cage, or that no AC is present.
• Off indicates the AC line cord is unplugged from all installed
power modules.
Link LED This LED is the activity/link indicator:
• Steady Green indicates a valid LAN link.
• Flashing Green indicates there is LAN activity.
LAN Speed
LED This LED is the LAN speed indicator:
• Steady Amber shows LAN is operating at 100 Mbps LAN
speed.
• Off shows LAN is operating at 10 Mbps LAN speed.