HP Netserver L Server series - Manual (Page 68)

Chapter 7 Rack Mounting the HP Netserver (4-Post)
62
Characteristics of
System E and
System U racks:
a.
b.
c.
d.
e.
5-Cornered Columns
Full Panel Vent
“HP Rack System/E” or
“HP Rack System/U”
Nameplate.
Numbered EIA Units
Anti-tip Foot extends
in front or back (on System E Rack)
e
d
c
a
b
Figure 7-1. HP System/E and System/U Rack Features
The HP Netserver LP 2000r rack mount kit requires two EIA units of space in the
rack. Before mounting the Netserver, plan the Netserver's location in the rack
relative to other rack components. Proper placement is vital both for safety and
operating efficiency. For more information, see “Rack Configuration Tools” later
in this chapter.
Tools Required
The rack-mounting kit provides tool-less assembly. The following items are used
to mark the rack columns prior to mounting the slide mechanism in the rack.
• Marking pen or masking tape