HP Netserver L Server series - Manual (Page 132)

Chapter 13 Alternative Rack Mounting (4–Post)
126
Pin
Pin
B
A
Figure 13-8. Attaching the Bezel to the HP Netserver
Cabling Rack Components
After installing the HP Netserver in the rack, refer to the white paper entitled HP
Netserver High Density Rack Solutions Overview (LP 1000r and LP 2000r) to
cable the components in the rack enclosure. The white paper is available on HP's
web site at the following URL:
http://www.hp.com/netserver/support
After cables are attached to rack components you can attach the Cable
Management Arm, as described in the next section.