Tools required, Hp netserver rack mount parts list, Rack configuration tools – HP Netserver L Server series User Manual
Page 123
Chapter 13
Alternative Rack Mounting (4–Post)
117
The HP Netserver LP 2000r rack mount kit requires two EIA units of space in the
rack. Before mounting the Netserver, plan for the Netserver's location in the rack
relative to other rack components. Proper placement is vital both for safety and
operating efficiency. For more information, see “Rack Configuration Tools” later
in this chapter.
Tools Required
The following tools are required to rack-mount the HP Netserver.
• M10 socket Torx 25 driver
• Marking pen or masking tape (optional for marking the columns)
HP Netserver Rack Mount Parts List
Ensure the rack-mounting kit provided with the HP Netserver contains the
following parts:
Table 13-1. Parts for Rack Mount Kit
Quantity Description
2 Slides
1
Hardware kit for HP System racks
Rack Configuration Tools
The HP rack configuration tools, including white papers, are on HP's web site at
the following URL:
At the Web site, search for the following:
• Configuration tools
• High density rack solutions
• Rack Assistant, Rack Configuration
• Order Assistant
• HP Netserver High Density Rack Solutions Overview (LP 1000r and
LP 2000r)
You can read about the tools or download copies for installation. These tools can
be used to plan a rack configuration for the components in your system.