HP D2D100 Backup System - Manual (Page 51)

Bound Volumes/Devices tab
No configuration is required on the Bound Volumes/Devices tab.
Linux iSCSI initiator
An iSCSI initiator is embedded in the operating system. Please refer to the “Linux Configuration Guide”
on the HP StorageWorks Tape CD-ROM for instructions on using it. Make sure that you have downloaded
the latest operating system patches before you configure your system.
Manual driver installation
Two drivers are required; an HP LTO Tape driver and a medium changer driver.
NOTE:
Certain backup applications require you to use their own drivers for both the tape device and medium
changer. For many applications these will be installed automatically during the software installation
process. If the backup software is already installed, you may need to manually update the drivers after
installing the HP D2D Backup System.
D2D Backup System 51