HP D2D100 Backup System - Manual (Page 92)

3. This displays the Setup page. (Or reports an error if no tape drives are currently attached to the
HP D2D Backup System.) Select the attached tape drive from the pull-down list, the required
verify/compare option and whether the physical cartridge should be unloaded after the operation
completes. Click Start.
NOTE:
A Full Verify reads the data back after copy and compares it byte-by-byte with the original.
A Quick Verify also reads back the data, but only ensures that it can be read. It may save
some time if another tape device on the HP D2D Backup System is being accessed at the
same time as the copy operation. No Verify is the fastest option.
4. The process warns you that the cartridge data on the HP D2D Backup System will be removed once
it has been exported. You must click OK to continue. It also checks that media is loaded in the
attached tape drive and that it is blank. If it is not blank, you are given the option of overwriting it
or canceling the job.
92 Export, import and copy using an attached tape drive