HP StorageWorks Enterprise File Services WAN Accelerator - Manual (Page 121)

HP S TORAGE W ORKS EFS WAN A CCELERATOR M ANAGEMENT C ONSOLE U SER G UIDE 121
2 C
ONF
IGUR
ING
TH
E
HP
EF
S
WA
N
A
CC
EL
ERA
T
O
R
4. Use the controls to complete the configuration, as described in the following table.
5. Click Save to save your settings permanently or click Reset to return the settings
to their previous values.
Setting
Monitored Ports You set TCP ports you want to monitor in the Reports - Monitored Ports page.
By default, traffic is monitored on ports 21 (FTP), 80 (HTTP), 139 (CIFS:NetBIOS),
445 (CIFS:TCP), 1433 (SQL:TDS), Radius (1812), TACACS+ (49), and 7830
(MAPI).
Control Description
Add New Trap Receiver Receiver IP. Specify the IP address for the SNMP trap. For detailed information about
SNMP traps sent to configured servers, see
“SNMP Traps” on page 210 .
Community. Specify the SNMP community name.
Type. Select v1 or v2c from the drop-down list to specify the SNMP software version.
Enabled. Select True to enable or False to disable the trap receiver.
Add Trap Receiver. Click Add Trap Receiver to add the configuration to the Trap
Receiver list.
Remove Selected Receivers. To remove an entry, click the check box next to the entry
and click Remove Selected Receivers.