HP StorageWorks Enterprise File Services WAN Accelerator - Manual (Page 41)

HP S TORAGE W ORKS EFS WAN A CCELERATOR M ANAGEMENT C ONSOLE U SER G UIDE 41
2 C
ONF
IGUR
ING
TH
E
HP
EF
S
WA
N
A
CC
EL
ERA
T
O
R
4. Use the controls to complete the configuration, as described in the following table.
Control Description
Server Settings Server Policy. Select one of the following options from the drop-down list to configure
the default policy for NFS servers:
• Global Read-Write. Specifies a policy that provides a trade-off of performance for
data consistency. All of the data can be accessed from any client, including LAN based
NFS clients (which do not go through the HP EFS WAN Accelerators) and clients
using other file protocols like CIFS. This option severely restricts the optimizations
that can be applied without introducing consistency problems. This is the default
configuration.
• Custom. Enables you to turn on or off the root squash feature for NFS volumes from
this server.
• Home Directory. All accesses to each directory are by a single user. This policy allows
aggressive caching of data and metadata.
Apply. Click Apply to apply your settings to the running configuration. (Apply your
settings to test a new configuration before saving them permanently.)
Default Volume Enable Default Volume with Policy. Specify this option and select one of the following
options from the drop-down list to configure the default policy for NFS volumes:
• Global Read-Write. Specifies a policy that provides a trade-off of performance for
data consistency. All of the data can be accessed from any client, including LAN based
NFS clients (which do not go through the HP EFS WAN Accelerators) and clients
using other file protocols like CIFS. This option severely restricts the optimizations
that can be applied without introducing consistency problems. This is the default
configuration.
• Custom. Enables you to turn on or off the root squash feature for NFS volumes from
this server.
• Home Directory. All accesses to each directory are by a single user. This policy allows
aggressive caching of data and metadata.
Apply. Click Apply to apply your settings to the running configuration. (Apply your
settings to test a new configuration before saving them permanently.)
Add New Server Configuration Name. Specify the name of the server to add a new configuration for an NFS server.
Server IP. Specify the IP address of the server and click Add Server.
Remove Selected Servers. To remove an entry, click the check box next to the name and
click Remove Selected Servers.